骑行网 HZBIKE

标题: 神器~ [打印本页]

作者: G精灵    时间: 2009-7-12 00:06
标题: 神器~
本帖最后由 G精灵 于 2009-7-12 00:08 编辑


2009 Manitou Dorado

2009 marks the return of the Manitou Dorado. On the surface it looks similar to previous Dorado’s but its essentially new inside and out. The Hayes Bicycle Group bought Manitou in 2006 and have carefully addressed the design and functionality of the new Dorado. The Dorado is assembled in the USA.
See all the details and a video inside detailing the new Dorado.


One of the biggest hurdles Manitou feels on this new Dorado is setting it up correctly. Even if you look around on the internet, you’ll see incorrect information on the 2009 Dorado. It is incorrect to think of the TPC+ as “low speed”, and what they consider high speed is not the same as what FOX / RockShox.
The TPC is more for the bigger square edge impacts (although it does affect small bump sensitivity to a degree) and their “high speed” adjuster is more in line with what FOX / RockShox call “low speed”.

(click to enlarge)

Make sure to watch the video below and learn about what the settings really do as well as a lot of the internal functions / improvements of the Dorado.
There’s a lot of incorrect information out there so you can hear it directly from Manitou in the video. You might need to get a drink / snack because it’s 20 minutes. You can also download the same video (.mov 500mb) if you prefer.

Contents:

(click to enlarge)


(click to enlarge)


(click to enlarge)

Specifications:

(click to enlarge)


(click to enlarge)


TPC+ and high speed adjustments (click to enlarge)


rebound (click to enlarge)


bottom-out circuit (click to enlarge)


(click to enlarge)

Weights:
ManufacturerModelYearReal(g)Pic.
ManitouDorado with short crown and full steerer tube2009
2908g / 6.41lbs
ManitouDorado 8″ Post Mount adapter2009
30
ManitouDorado 8″ IS adapter2009
26
ManitouDorado Tall crown2009
187
ManitouDorado Short crown2009
178
.
Cost:
The MSRP is $2775 USD for the 2009 Manitou Dorado. In the US, orders will be taken by dealers and fulfilled directly from their Milwaukee, WI facility. In the rest of the world, they’ll be carried by distributors and sold through shops. The Dorado is assembled in the USA.
Factory Support:
The Dorado is a bit unique and the Hayes Bicycle Group wants to make sure the people who buy it get the most out of it. They’re offering a support package for every person who purchases a Dorado that includes a good bit that is outlined below.
Customers who purchase a new Dorado in 2009 will receive two free overhauls of their fork within the first two years of ownership.
This service will be performed either directly by HBG’s service center in Milwaukee, Wisconsin, or by an authorized Manitou Service Center.
Each overhaul will include a complete tear-down and inspection, replacement of damper fluid, and replacement of all worn or damaged o-rings, dust wipers, and oil seals.
Additionally, routine maintenance will be provided at no-cost at all events attended by the Hayes Bicycle Group race support crew.
Initial Analysis:
The 2009 Dorado rides quite well and we’ll be posting up a full review of it after we get more time on it. So far it rides amazingly well and is one of the best (if not the best) fork available. The price tag is steep but if you want the features and benefits of the Dorado it’s a hard fork to beat when it comes to performance on the downhill.

(click to enlarge)

The TPC+ and high speed adjustment work in harmony together to provide a supple initial feel and maintain good ride height. Often it’s hard to set up a fork to be plush initially, not dive in the corners (or under heavy braking), and take big hits without harshly bottoming but the 2009 Dorado does just that. The bottom out circuit is very impressive to say the least and works with you to maintain control on big hits without blowing your hands off the bars.

(click to enlarge)

If you’re looking for a high quality race fork for 2009 and want the best, it’s arguable that the Dorado is the answer for 2009.
Contact Info:
If you have any questions, feel free to contact David Lee
1.888.686.3472 extension 4243
[2009 Manitou  Dorado Gallery] [Hayes Bicycle Group Website]


作者: QLM    时间: 2009-7-12 04:29
轻量化怪兽~~ 配banshee 哇塞~~
作者: 虐尸狂    时间: 2009-7-12 10:28
其实,这个叉没照片里这么勇猛,我一西安的朋友买了嘛,然后他告诉我说,他下一次山叉管两边都会沾上轮胎上的泥,说明什么问题。。。。
作者: adam_k    时间: 2009-7-12 12:26
说明山路泥泞
作者: foxracing    时间: 2009-7-12 19:51
同上。
作者: zlxzlx92    时间: 2009-7-12 20:11
[luguo]
作者: 鲤鱼    时间: 2009-7-13 14:02
其实,这个叉没照片里这么勇猛,我一西安的朋友买了嘛,然后他告诉我说,他下一次山叉管两边都会沾上轮胎上的泥,说明什么问题。。。。
虐尸狂 发表于 2009-7-12 10:28


没有叉桥,叉臂在过弯时候不够坚硬,容易扭动?
作者: foxracing    时间: 2009-7-13 17:25
36mm,这个管径上,刚性的差异是很小的。
作者: kgkobelco    时间: 2009-7-23 12:49
其实,这个叉没照片里这么勇猛,我一西安的朋友买了嘛,然后他告诉我说,他下一次山叉管两边都会沾上轮胎上的泥,说明什么问题。。。。
虐尸狂 发表于 2009-7-12 10:28


那个应该是旧款的吧···
作者: 随便逛逛    时间: 2009-7-24 19:21
[swe][swe]
作者: QLM    时间: 2009-7-24 19:54
纯表情  帮 吴老板 警告ls一次。,。
作者: 虐尸狂    时间: 2009-7-25 17:28
那个应该是旧款的吧···
kgkobelco 发表于 2009-7-23 12:49

09的,不过没这个版本好。。。
作者: 开水    时间: 2009-7-25 19:44
送我的话,我会立即卖掉换Boxxer,还有找。




欢迎光临 骑行网 HZBIKE (http://hzbike.com/) Powered by Discuz! X3